You can clean and flush RV black water tanks by connecting the tank wand to an outside water hose. Run the hose inside your RV through an open window. Open the toilet bowl flush valve, stick the wand inside and down, to power rinse the inside.

1. Rv Full Hookup Site Can You Flush Black Tanks At Site Without
2. Rv Full Hookup Site Can You Flush Black Tanks At Site For A
3. Rv Full Hookup Site Can You Flush Black Tanks At Site For Kids

• We are taking our first trip with our 2017 reflection. We have been camping now for about three weeks. Everything seems to be working well. I have two questions. After I open the black tank dump valve and wait for the black tank to empty I then hook up a hose to the black tank flush. I leave the black tank dump valve open and turn on the hose for the black tank flush.
• With our first RV we were a little afraid of dumping the black and grey tanks. We learned the dumping process is easyafter a few mistakes in the beginning!

How to Clean and Flush Your RV Black Tank and Its Sensorsin 3 Easy Steps

This article is all about How to Clean and Flush Your RV Black Tank, and its Sensors in 3 Simple Steps which are:

1. Drain your RV tank(s) at the dumpsite.
2. 2. Remove debris/buildup from the tank
3. 3. Add enough water to cover the bottom of your tank

Cleaning your RV black water tank and its sensors doesn’t have to be a dreadful experience as long as you clean and maintain it regularly. Routine washing can prevent bacteria build-up that leads to intense and unpleasant odors. Clogs are also much less frequent, leading to fewer complications and repairs.

When you’re enjoying a relaxing family camping trip, the last thing you want to worry about is an issue with your RV black water tank. To avoid this, follow our black water tank cleaning tips for your black water tank and its sensors.

Be sure to check out our YouTube Videos at the end of the article for a full demonstration of how to clean and flush your RV black water tank and also all of the RV sewer equipment we use to clean and maintain our RV black tank.

How to Clean and Flush Your RV Black Water Tank

Flushing an RV tank is a pretty simple task. That said, it is also one of the most intimidating and unpleasant for those unfamiliar with it. After you’ve flushed your tanks a few times it will become nothing more than a basic routine.

Here’s a run-down of how an RV tank flush works:

1. Drain The Tank

Connect your RV sewer hose to the dumping hole and the other end to the tank valve. Open the tank valve and allow the contents to flow into the sewer/septic.

It’s highly recommended to dump the black tank first, followed by the gray. The thought process is that the gray water helps to flush away some of the less than desirable black water debris and residue.

Keep in mind to dump your black tank when it’s at least halfway full (if not ⅔ of the way full). This allows waste and other solids to float and the liquids to drain properly. If you go to flush the tanks when the black tank is less than half full, be sure to add some extra water first.

2. Remove Debris/Buildup From Tank(s)

As lovely as it would be to merely dump your tanks and drive away, it isn’t quite that simple. When you flush your tanks, you need to perform some basic maintenance as well, including removing any debris or buildup that’s formed in the tanks.

You can do this in several different manners:

You Can Use a Macerator

A macerator uses high-velocity water pressure to shoot jets that clean the inside of the tanks and hoses to remove debris and build up. The macerator basically liquifies any waste or build-up and allows it to be drained out of the tank like water.

You Can Use a Flush Valve

Another great tool for taking care of your tank is a flush valve. These valves connect a flush valve barrel to utility or garden hoses and allow you to choose from “hose” or “tank” settings. Backflow prevention is built-in to flush valves so that your clean water hose/source is never at risk of being contaminated.

You Can Use a Tank Rinser

Tank rinsers come in two versions, one that can be set into your tank each time you flush it, and one that can be installed into your tank permanently. Permanent rinsers rotate in 360 degrees shooting water at high pressures while others come in wand-style hand-operated devices that connect to garden and utility hoses.

3. Add Enough Water to Cover the Bottom of Your Tanks

Tank flushing ends once you’ve dumped it, removed any debris or build-up, and filled up the bottom with water. This will help to keep your system functioning properly and avoid any damage.

Typically, four or five quarts of water will do the trick. Depending on the shape and size of your tanks, you may need to add more or less.

4. Treat Tank (Optional)

A fourth (and optional) step is treating the RV tanks you’ve just flushed. Treating tanks after dumping, flushing, and cleaning helps to prevent future buildup, clogs, odors, as well as accelerating break-down time for future waste stored in the tank.

The black tank should be treated as close to every time you dump it as possible. The gray tank, on the other hand, isn’t necessarily one that needs to treat each time you flush it.

Most tank treatments are quick and simple to use. That said, picking the best one can be a daunting task due to the large number of products on the market. Tank treatments that are enzyme-based, as well as formaldehyde-free, are the most preferred (as they are the safest and most efficient).

Pressure Washing and Backwashing Your RV Black Tank

After cleaning your tank in the manner described above, you’re ready to pressure wash or backwash the inside of the tank. Doing so will break off, soften, and liquidate any debris or waste-matter. It is the final step to proper deep cleaning.

For the most part, this can be done two different ways; with built-in backwash systems or via an RV tank cleaning wand:

Built-In System Directions

If your RV comes with a built-in backwash system, most of the time it’s as simple as connecting a garden or utility hose to the proper connection and flipping on the propper backwash or pressure washing valve (located on your RV).

Be sure to have the water running while backwashing the RV tanks. When you notice that the drainage has become clear, and is debris-free, you’re finished with your deep cleaning.

Using a Wand

For RVers who’s rigs have no backwash equipment built-in, there are a large number of RV tank cleaning wands and pressure washers available on the market. Similar to backwashing equipment, wands are attached to utility or garden hoses powered by water spouts at home or the camp/dumpsite.

To finish your deep cleaning with a wand, simply stick the wand down the open toilet lid and into the tank. Outside, have someone turn the water on, or turn it on yourself and then come back inside. Once the water is spraying from the wand, move it all around as to hit all of the nooks and crannies inside the tank.

Outside, again, someone should water the drainage until it is both free of debris and clear in color, at which point the job is finished.

How Often Should You Flush Your Black Tank?

There is no correct number of times per year, or how often in general, you should flush your holding tanks. This number is based on multiple factors, such as how many people are using the tanks, and what size the tanks are, to begin with.

There is also the factor of how full you let your tanks get before you dump them. Many RVers swear by the 2/3s full rule, while others wait until their tanks are nearly completely full.

When traveling alone, or with one other person, you may get away with flushing your tanks once a week. If you’re RVing with a larger group, you may need to flush your tanks as much as every other day or so (or even daily).

Regular Maintenance Tips For Every Dump

There are a few maintenance tips to keep in mind each time you flush your tanks at a dumpsite:

• Make sure to wear some sort of protective gear such as rubber gloves or a face mask
• Every time you flush your tanks you should begin with your black tanks
• Take advantage of the soapy water from the gray tanks to clean black water residue
• Pack a spare (clean) hose along when you head to the dumpsite in case they don’t have any available
• Dump the black tank before the tank is over ⅔ of the way full
• Avoid using freshwater hoses for any type of black water tank or sewage hose rinsing
• Be courteous, if the dumpsite is busy, pull-off and let someone else dump while you treat your tanks
• Only dump tanks into the drainage pipes, and always clean up after yourself (leaving the site as clean, or cleaner, than you found it)
• Make sure to clan the black-water valve before returning to camp

Deep Clean Tips For Monthly Cleaning and Before Storing Your RV

Here are a few deep clean tips that’ll make your monthly cleaning easier (and when you go to store your RV as well):

• Dumping as often as possible will make your deep cleaning and pre-storage cleaning processes much easier
• Deep cleaning once per week (while using the RV) will also make your deep cleaning and pre-storage tank cleaning quicker and more efficient
• For the best deep cleaning results, dump your tanks and remove debris as you would normally, and then drain the tanks completely
• After tanks are drained, fill them around ¾ of the way full and add bleach (two cups should do it in most cases – make sure to keep the toilet lid closed to avoid harmful fumes)
• After approximately 5 to 10 minutes drain the tank again, refill it, and drain once more right away
• Repeat the process of filling the tank with fresh water and draining the tank until you see no debris or build-up is left and the bleach smell has also disappeared completely
• It is important to rinse all of the bleach away so that it doesn’t damage your plumbing system)

Can You Put Bleach in an RV Black Water Tank?

Yes, you can put bleach into your RV black water and gray water tanks. That said, the amount of bleach and how often you should use it in each type of tank varies.

For black water tanks, many RVers mix anywhere from a few caps to a quarter of a cup of bleach with approximately a gallon of water. It is enough to get the job done, cleaning and sanitizing your tanks, but not enough to damage your plumbing or hoses. It is also safe to dispose of at the dumpsite.

Gray tanks can also be treated with bleach. One or two caps full of bleach can be added into the gray water tank for sanitizing purposes including reducing bacteria and odors.

Very thoroughly rinsing tanks after using bleach in them is highly recommended especially if you use a large amount (more than suggested above). High concentrations of bleach in your RV plumbing system can result in major damage.

The Best RV Black Water Tank Flush System

An RV black water tank cleaning wand is excellent for spraying down your holding reservoir. However, it can be tedious and cumbersome to direct the hose through the toilet each time. The RhinoFLEX Rhino Blaster, on the other hand, is a durable, reliable alternative that can be stretched, retracted, and twisted while maintaining its form. This sturdy RV sewer hose is made from 23 mils of heavy-duty polyolefin and is equipped to fit your needs.

The adapter cuts down on time and energy while providing an in-depth cleaning experience. Many other RV sewer hoses are flimsy and difficult to use as they are vinyl-based. The RhinoFLEX is resistant to these damages because it is composed of polypropylene and polycarbonate.

Unlike the wand, this device does not require a toilet hose as it sits at a 45-degree angle to rinse the black water tank. Leakage is not a concern as the clear plastic elbow connection maintains a secure connection with an RVs sewer outlet.

With the black tank valve open switch the valve to change the direction of water flow and connect a garden hose to the RV sewer hose. When the fresh water is turned on, its force will dislodge any obstructions and remove any residue stuck inside the container. A translucent elbow allows you to gauge when the tank is clean and ready to go.

We love ours because after we dump our black water tank it takes much less time to refill the tank to give it a second flush. We used to have to sit inside the RV and run the hose and wand through the RV into the toilet or just run the toilet for a long time to refill the black tank.

Now we just use the water hose at the dump station and attach it to our RhinoFLEX Rhino Blaster and quickly and easily refill the black tank and the wastewater goes right down the sewer hose. It is the best way I know of to maintain your black water tank and sensors. Just remember to close your sewer tank valve when you are done.

NOTE: Never attach a freshwater hose to the Rhino Blaster and always wear heavy duty protective nitrile gloves while handling all parts of your septic system and hoses.

RV Black Water Tank Sensor Cleaning

Fully functioning RV black water tank sensors are vital to the dumping process. If your sensor is faulty, it will signal that the tank is full or partially full after emptying your holding tank.

Small pieces of metal, also known as sensors, are located at 1/3, 2/3, and full increments. When the basin fills to each mark, the electrical circuit is completed, which turns on the RV monitoring panel light. This control pad indicates when you need to empty your tank.

When the sensors stay lit even after dumping, excess residue or waste stuck to the black water tank is usually the root cause. This material is wet, which causes it to complete the electrical circuit, even when there is nothing in the tank.

To fix this issue, fill the holding tank with water and add high-quality sensor cleaner into the toilet. The container label should instruct how much to use and any other specific directions. Allow the mixture to settle for 8-12 hours.

If possible, take a short drive to squish around the water and loosen any debris. After the allotted time, empty the tank and observe changes. If the sensor is still not working, repeat the process until you achieve the desired results.

To prevent this from reoccurring, regularly rinse, clean, and sanitize your RV black tank, as stated above. Also, be sure to use toilet paper that is specially designed for an RV plumbing system to avoid build-up.

You can even use these same methods to clean your RV gray water tank as well!

How Do RV Black Water Tank Chemicals Work?

RV black water tanks host a variety of odor-causing bacteria that can turn any trip into an awful one. Holding tanks can also clog up and wreak havoc on the overall black water system, which is why it is necessary to break down the bacteria and excess material before it becomes an issue.

Compared to a home or public toilet, an RV black water system requires much more maintenance. Standard plumbing pushes waste and many gallons of water through a pipe until it reaches a sewage treatment plant.

An RV plumbing system, on the other hand, uses limited water to push the waste into the holding tank. With more debris than water in this localized area, bacteria multiply quickly, resulting in a putrid smell. Driving can also make the odor worse as the contents move and release the stench.

Adding chemicals that contain bacteria and enzymes to the tank will decompose the solids and keep the contents liquified, thus preventing jams to the system. The smell is also eliminated in this process, as these added compounds dissolve the bacteria.

There are various RV holding tank treatments on the market that can help get the job done. These cleansers can be found as liquid or dissolving tablets and contain either one or a combination of formaldehyde, an enzyme, a mineral or salt, and bacteria. These products are straightforward, as you quickly add them to the black water tank via the toilet.

Regardless, always be sure you are choosing high-quality, environmentally friendly products to avoid stains and other issues. We use Aqua-KEM in our RV. It works great!

Do Black Water Tanks Require Special Toilet Paper?

Toilet paper is something for any RV owner to consider. Regular tissue does not break down well and will sink to the bottom of the RV black water tank. This process will make emptying more difficult and lead to clogs. Adding more chemicals to counteract this issue will not be helpful, as it will only lead to higher costs and a greater risk of blockage.

Therefore, RV-friendly toilet paper is a much better choice as its purpose is for these plumbing systems. Compared to regular brands, these products dissolve faster and more effectively to ensure the tank doesn’t get clogged.

Rv Full Hookup Site Can You Flush Black Tanks At Site Without

While RV tissue is a tad more expensive than standard toilet paper, it is well worth it to spend a few extra dollars beforehand to save money in the long run. Aside from causing issues with your black water tank, using this tissue will increase your chemical expenses. For these reasons, it is much more cost effective to spend more on toilet tissue rather than cleaning products. RV toilet paper is also much eco-friendlier than chemicals, making it a better choice all around.

There are many brands you can buy at RV dealerships, accessory stores, or online. To decide which kind to purchase, be sure the package label states either that the product is made specifically for RVs or that it is safe for RV toilet systems. Each has its strengths and weaknesses, so you may need to try a few different brands until you find one that suits you.

RELATED READING: Check out our article called 29 Must Have RV Accessories for a New Camper or Travel Trailer for all of the gear you need for your RV!

What’s the Difference Between RV Black Water and Gray Water Holding Tanks?

For the most part, there are two types of RV holding tanks; black water and gray water. Blackwater RV holding tanks are where sewage and otherwise “dirty” water is stored. Gray water holding tanks for RVs, on the other hand, is where the non-sewage water (such as the water from RV’s kitchen sink’s drain) is collected and stored.

Blackwater is definitely the more problematic holding tank as it contains raw sewage. For that reason, when flushing their tanks, many RVers save these bad boys for last. Some RVers even religiously flush their black water tanks and hoses with their gray water to help remove the blockage and unwanted leftover black water residue.

How Long Can You Leave Black or Gray Water in an RV?

Generally speaking, the black water tanks on RVs last for approximately 5 to 7 days while camping. For families, or groups, the tanks will last much less (closer to 2 or 3 days). However, your RV’s black tanks can be modified/extended to hold larger capacities.

Speaking of which, you should dump your black tank every 3 or 4 days to once per week when actively using your RV. Doing so more frequently doesn’t allow enough time for the solid waste to break down into more easily manageable (and drainable) sewage.

All things considered, the black water tank should be flushed each time the RV is moved. That means in between camping sites as well as before/after heading home from the road.

The gray water is another story. Gray water tanks are capable of storing fresh water for upwards of two weeks at a time. But, that really just depends on your RV, tanks, and water usage habits.

Conclusion

Creating a routine with your RV black water system is the best way to prevent damage, reduce odors, and avoid costly repairs.

Using a reliable, effective technique, regularly rinse, clean, and sanitize your RV black water tank and purchase the highest quality chemicals you can afford. Always use special toilet paper and avoid flushing other materials down the toilet.

Abiding by these guidelines will help maintain the integrity of your tank while creating a much better experience for both you and your passengers.

To learn even more about how to clean and maintain your RV black tank check out some of our other articles too!
1️⃣ What Are RV Holding Tanks and How Do They Work?
2️⃣ Can I Dump RV Tanks at Home?
3️⃣ How Cold Does it Have to Get Before RV Pipes and Tanks Freeze?
4️⃣ Is Special RV Toilet Paper Really Needed in an RV?
5️⃣ How to Clean and Store an RV Sewer Hose

What is your method for cleaning and maintaining your black water tank and its sensors? Please share in the comments below.

If you want to get the most out of your RV will come to rely on hookups; water, sewer and electric. Taking full advantage of these while traveling in your RV will bring a high level of comfort regardless of your destination or stopovers. Each of these three hookups allows you to enjoy at-home comforts while you are on the road. They are found at most RV parks and campsite, but you should know that they are not free. You will have to pay a higher per site price to use these hookups. To many, this is more than worth it. Some sites have partial hookups that allow you to pay for only what you use.

Water Hookups

These will give you access to running water no matter where you are. Many of the appliances and features of your RV will require water such as the toilets and sinks. With a water hookup you can drink tap water so save on bringing water bottles and you don’t have to search endlessly for a public bathroom. Once you are parked, this is the first hookup you will want to connect to. Not all parks require the use of a water pressure regulator, so be sure to find that out first.

B sure to unwind your hose completely to remove all kinks before connecting to the RV. Once secure, connect to the hookup and turn on both the water and gray tank valve. Always check for leaks at both ends. When it is time to disconnect, turn off the water supply, shake the hose to remove any lingering water and disconnect from the water source first, and then your RV. To use your shower, do dishes, and flush the toilet, you want to be sure you find an RV park with a water hookup.

Sewer Hookups

If you are using water hookups, you also want to use sewer hookups too, so you can dispose of any running water. You have a black tank which holds waste from your toilet and a gray tank which disposes of water that doesn’t contain waste. You never want your black tank to be over 75% full and you will never have to worry about this with a sewer hookup.

You need a sperate hose to the water hookup and this will be done after connecting the water. Attach the hose to the hookup first and then your RV. You can open the black tank valve as soon as the hose is secured. To disconnect, you want to always wear gloves because it can get messy. Turn off all valves and disconnect from the RV, holding the hose upright. This will allow waste to flow back down the hose into the sewer system. Always wash the hose with waste-fighting chemicals before storing it.

Electrical Hookups

Rv Full Hookup Site Can You Flush Black Tanks At Site For A

This allows you to power up the RV’s electrical system so you can use heat, lights, AC, and appliances. Most parks and campsites offer 30 and 50-amp hookups. Most likely your RV is set up with one of these two options. Smaller RVs are set up with 30AMP hookups, larger ones with 50. These will be the last hookups you make once settled into your location.

You must make sure the hookup box matches what your RV can handle, because many older sites are not equipped with up to date systems. Double check first to avoid blowing the entire electrical system. Hook both ends of the cable up, turn on the regulator switch, and you have lights, power, and action. To disconnect, turn the regulator off and unplug the cable connected to the RV first, then the power source.

Rv Full Hookup Site Can You Flush Black Tanks At Site For Kids

Remember that not all campgrounds and RV parks will offer hookups, so you want to research ahead of time. You can plan your stops accordingly. These hookups allow the comforts of home to be with you while you travel. The staff at the sites are always more than welcome to assist you with questions and connections. Add the comforts you are used to and make your trip special and your RV a home away from home.